Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double glazing repair-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a great idea cover the gap with tape after the glass is removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap between the window and the door is significant, you may prefer a security screen that also includes windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you can't reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your upvc doors repairs window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaks in upvc door repairs near me windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs (click through the following page) you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak is coming from between the glass in your double glazing repairs near me glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze it could be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges will be damaged over time. It's very simple to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you suggestions.

It is also essential to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges may also become misaligned due to wear, creating gaps where the sash and frame meet. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it is possible to just give them a good clean, but in some cases it might be necessary to get them replaced.

The next most common reason for draughts are the window seals. They can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce the risk of draughts.

The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional as soon as you can.