Subaru Impreza Key Problems

The Subaru impreza key permits owners to lock and unlock their vehicle with the press of a button. A dead battery on the key fob is the most frequent reason for the key fob to cease to function.

Changing the battery is quick and simple. Find the small battery that is the round, flat cell inside the casing that holds the key. Unlock it and replace it with the battery, making sure that the correct side is facing up.

Keys stolen or lost

We've been there before when you reach into your pockets to get your keys and they're nowhere to be found. Luckily, it's rarely too hard to find your Subaru keys, and there are many ways to replace them quickly and cost-effectively.

If you have a standard metal key and you're looking for a replacement key subaru, you can take it to a store or locksmith that has Subaru blanks (these are usually marked with "Subaru") and get them duplicated. They may need to replace the battery for the key fob as well and, in that case, you'll need a CR-2032 replacement that is available at most hardware stores and a few retailers like Amazon.

For the key fob or the remote/intelligent key, you'll have to visit an auto locksmith that can program new subaru key keys to your Subaru model. You will pay between $50 and $250, based on if your subaru car key replacement cost has a transponder key or smart key.

You'll have to provide the locksmith or dealership with your vehicle identification number (VIN) which is located on the dashboard, near the windshield. This number is needed to confirm your car's warranty status and to ensure that the key is coded correctly for your Subaru model and year. The VIN includes information about the manufacturer and where the car was made. It also tells you if there are any special features in the car like immobilizers, which prevent the engine starting in the event of a misplaced key being used.

Faulty Key Fob

A key fob that does not function correctly could be the result of a variety of causes. It could be a minor issue with the battery, or it could require a more intricate repair. A dead battery, programming problems in the car or problems with the electrical system in the vehicle are among the most frequent issues with a Subaru keyfob.

One of the most simple fixes is to replace subaru key fob the key fob battery. They can be found at some big-box retailers and hardware stores. They are priced at around $10 and can be replaced in just a few minutes. How to do this is in the owner's manual. There are also many YouTube videos that will guide you through the process.

Another possible cause could be water damage to the key fob. When you take it out of the pocket and putting it in the water could affect the metal retaining clips that keep the battery in place. If the key fob is still having problems after replacing the battery, the problem could be due to the transmitter circuit board or any other component in the vehicle. A technician skilled in troubleshooting the vehicle can investigate and pinpoint the problem. They can re-program the key fob and make sure that it is compatible with the vehicle. They can also examine for wiring or antenna issues that may prevent the keyfob from transmitting signal properly.

Locking or Unlocking Issues

If your Subaru Impreza key fob won't lock or unlock the doors, there could be a variety of issues. This issue could be caused by a dead coin battery, malfunctioning module as well as signal interference or water damage. You may have your key fob programmed by a locksmith or dealer.

If you are unable to open the trunk, the key fob may have the trunk lock setting set to "on". This is a security feature that keeps thieves from taking your vehicle. Contact your SUBARU dealership to change the settings for your trunk lock/unlock.

Another reason why you may have a locked steering wheel is when you make a sharp turn and the car locks itself automatically. This happens when the vehicle detects a fast turn, which can affect its transmission system and engine. When turning, slow down to avoid this.

Check that the dealer or locksmith has programmed and cut the spare keys or replacement keys you have. Also, make sure the emergency key works on all trunk and door cylinders because these are the only means to access the vehicle if locked out. Also, ensure that the new key or spare does not have any scratches or indications of manipulation on it.

Keyless Entry

Many Subaru models are equipped with keyless entry. This allows you to lock or unlock the doors and trunk by pressing the remote. The system operates using a radio signal that communicates with the vehicle whenever you're within range of it. There are many different systems that can provide this function. They range from simple kits that unlock only the driver's door to more advanced ones that offer remote start and smartphone connectivity.

The ability to use a keyless entry system on your Subaru is convenient and safe but it's vital to be aware of what to do if the buttons don't function properly. You can attempt to solve the issue at home, but you might have to bring your Subaru to a professional for a diagnosis. In the meantime, you can follow these tips to help keep your car's remote control functioning as intended.

If the fob that controls the key on your Subaru is soaked you must clean it with isopropyl, then let it completely dry before installing the battery. This will prevent moisture from damaging the fob, or causing problems down the road.

If your key fob has stopped responding, shut off the engine and then open the door of the driver. Push the door button to unlock and then close it, pressing the button a certain number of times (usually one for each digit) until you hear the sound of a chime. Repeat the process with each door until you receive a response from all of them.