Tips For Replacing a Window Handle

Switching your window handle is a simple task that can be accomplished in the at-home comforts of your home. Follow these steps to ensure an elegant and smooth finish.

Begin by removing the screws to expose the screws inside the uPVC window handle. Then measure the spindle length to ensure you get the correct size replacement.

1. Take a measurement of the length of the Spindle.

When replacing a window handle, it's important to determine the dimensions of the spindle right. It could affect the tightness or elasticity of the handle and whether the handle will lock correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock in the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the older 9mm versions. The modern industry standard is 8mm however this wasn't always the case, so when buying a new handle it's essential to check the measurements.

Remove the handle. This can be done easily by turning the handle to the open position and unscrewing two screws that hold the handle in place (which are often hidden behind plastic caps that will need to removed). Once removed take a measurement from the base of the handle until the end of the spindle. This will give you the measurement required to purchase a replacement.

There are many options when you're looking to select the perfect window handle. From sleek chrome that will fit into a modern home to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or the more quaint Tudor Cottages with curled mongoose-tail latches. The options are endless but the most important thing is to choose a style that suits your home.

Espag handles are generally fitted to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur double glazing handles are available in a variety of sizes, ranging from 58mm to 62mm. Window double glazed handles from Cadenza are a different size again because they feature an angled blade that functions a multi-point locking mechanism inside the window.

Another aspect to consider when selecting a new window handle is knowing what hand you need, this is simply defined by the hand you use to open the door. Inline espag handles are compatible for left or right-handed windows. Cranked window handles are hand-operated and can only be used on windows that open in one direction.

2. Take the handle off

The handle may be damaged or worn out or simply worn out, a window handle that falls off can be very frustrating. However, the good part is that replacing the uPVC window handle is a simple task you can complete yourself. You only need some basic hand tools as well as some time to complete the process.

You will need to first open the window, and make sure it's not locked. Then, take off the screw caps that hold the handle in place. Once these caps are removed, you can begin to work on removing the handle itself.

The handle itself is fixed to a spindle within the window frame. Depending on the type, this is secured with a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both of these types of handles are employed on casement windows, which includes windows made of aluminium Door handles. The handles can be locked with a key to prevent unauthorised access from the outside. Or you can lock the handles by turning them clockwise.

To remove the handle you'll need a flat blade screwdriver to remove the clip that holds the handle in place. When this clip is released the handle will fall off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle in order to make sure that the new handle is compatible with this size.

Once you have decided on the proper size of the handle, screw it in the correct position. You will need to ensure that the new handle is securely secured and that it is turning in the correct direction (clockwise for open and counterclockwise for closed). It is important to make sure that the handle hasn't been installed upside down.

Finally, you should replace the screw cover caps. After you have completed this step, you can test the handle to make sure it is working correctly. Also, you should test the locking mechanism by moving the handle until it is locked position, and then back again.

3. Take off the Screws

A uPVC window handle is a crucial element of any home and is often the first thing to exhibit signs of wear and tear or damage. It can be caused by natural causes or from regular use, or intentional damage caused by criminals who might seek to open a closed window and gain entry to your property. But, a simple fix will solve the issue and stop the problem from occurring again.

UPVC handles can be difficult to open when the locking mechanism isn't functioning correctly. It is often possible to fix the problem by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.

Once you've removed your old handle, you'll need to remove the screws holding it in place. The screws are typically located on the inside of the handle's base. It could be necessary to use a screwdriver to do this. Be careful not to over tighten the handle as this could cause it to become loose.

Then you will need to locate the pins or screws that keep the handle in place. They will likely be located on the inside of the base of the handle and you'll need either a screwdriver or pair of pliers to take them off the screws. After they've been removed, you'll need to replace the caps on the screws should you choose to do so and test the new handle to make sure it's working correctly.

If you're ready to put in the new handle, simply line up the spindle with the cutout in the window mechanism and screw it in the appropriate position. Make sure the handle is in the open position and that any screws are secured before replacing the screws' covers, if you wished to do this. It's done! You can enjoy the new window handle. We hope this will allow you to avoid the need for expensive window and victorian door handle replacements in the future. Contact us if you require more information about this or any aspect of your uPVC window.

4. Fit the New Handle

Whether you're replacing a broken handle or simply updating it, the process is surprisingly simple and can be completed in a matter of a few steps. The first step is to determine the type of handle, take measurements of its spindle, and determine what tools you will need to complete the task. Always prioritise safety when working with windows and tools. Make sure you follow the steps and make sure that you have a handle that is safe to use.

To begin, find the screws that hold your window handle. Remove these while firmly gripping the handle to stop it from falling and causing an injury. Once the screws have been removed, you can put them in a safe place to be replaced in the future.

Once the old handle is removed, you can begin fitting the new one. The handle must be a perfect fit to function properly and secure the window in its closed position. Then, slide the metal bar that is square on the handle into the hole for the window mechanism.

The last step is to replace the screws caps and test the handle to ensure that it is working. If you are not satisfied with the results, or the window doesn't shut or open properly contact our experts for help.

Almost all UK homes are equipped with uPVC Windows. This means that a lot of them will require replacement at some point because of wear and tear or breakage. The procedure is fairly simple and can be carried out by anyone with a bit of knowledge of DIY. The most important factor in the success of the procedure is making sure you're using a replacement handle that matches the window's size and design. If you're not sure what kind of handle you'll need, feel free to get in touch with our team who can help you navigate the various choices available.