Sash Lock Door Handles

If you want to enhance the security of your home without sacrificing the aesthetics, choose sash lock door handles. They're used with mortice latches or sash lock. They can be used in conjunction with a night latch to provide additional security for doors that are internal.

The handles are made up of a handle/lever on the backplate. They are usually used with a three or five lever mortice lock. They can also be used with tubular latches.

Lever Lock Handles

There are a variety of lever door handles available to match any home decor. Rustic lever latches work well with ranch or farmhouse style decor and are also very popular in modern homes. Classic lever handles are round or spherical and are easy to grasp. They are simple, affordable and can be used with any style of home design. For an elegant style, choose polished chrome or a satin nickel handle. These finishes are robust and easy to clean. Other choices include antique bronze and polished brass. Some handles have designs, such as amber worm-eyes, or long-horned cyrstals. Some levers have a pin, star or other shape molded in the bottom.

To change the lever lock door handles first make sure you have the correct screwdriver or tool to take them apart. Based on the model and design, you may need to make use of an awl or nail to remove the lever handle. Some lever handles have an apex or notch on one side of the base that can be used to break it open.

Follow the manufacturer's instructions for removing your handles when you have the right tool. Examine the spindle of the new lever. Doors that have been morticed (cut into the door) to accommodate latches from the past or locks and must be fitted to a certain spindle size. The majority of lever handle manufacturers have a standardized door spindle size for handles.

If you are replacing sash cords a sash lock door handle the old handle should be removed and the tubular latch bolt, that is located within the door, needs to be removed from the strike plate inside the door frame. The next step is to drill a hole into the door frame, then insert the latch bolt through and connect it to the strike plate within the door frame.

It is essential to keep in mind that when installing a new lever handle the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate by hand. The user must not be required to hold their hands tightly or turn their wrists. To be in compliance with ADA compliance standards the lever door handle can't be operated by using the thumb and finger or the entire hand.

Sash Lock Handles

The primary function of locks for sash is to seal the door by pulling the sashes that move tightly together. This helps maintain the temperature inside the home and prevents drafts. These locks are great for doors that do not require for a keyed lock system.

Sash locks are sometimes called mortice sashlocks. They incorporate a latch and dead bolt into a single case that is inserted to the surface of a door. They are used in conjunction with a pair of door handles and are available in a variety of choices to fit your home.

Lever lock handle operates with a lever on a backplate cut out below it, which allows a key to be inserted to operate the mortice sash lock. This lock is most commonly used on doors that are not locked such as those in dining and living rooms. However, it can also be utilized with a tubular lock to create an extra secure door.

These are designed to hold the wooden sash windows cost in place for multiple times, and come with hooks that fit inside the keeper. They are available in a variety of styles and designs to fit into various window types, such as sliding sash windows or hinged casement windows. Some are made of cast aluminum while others are made of brass or wrought iron. These are available in various colors to match other components of door furniture, like escutcheons to protect the keyhole.

3 lever sash locks can be used on doors inside but not for external doors, because they lack the security level required by insurance providers. They also have lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.

A door sash lock that has 5 levers is a much better option for external doors because it provides higher levels of resistance to forced entry and is more difficult to bypass or pick. These locks feature an upgraded design that's been tested and certified to meet the strictest security, fire and disability requirements.

The first step in replacing a sash lock handle is to remove the old fastener, by removing the screws from both ends. Make sure you have a screwdriver in your possession and separate the parts carefully so as not to damage them. Mark the screw holes with pencil to ensure that you place the new fastener in the correct position when you are ready to install it. Clear away any dust or flecks of paint and then screw the new fastener in place. It's important to test the handle to make sure it functions properly and forms a an effective seal.

Tubular Latch Handles

The tubular latch is a latch mechanism that sits inside a door and is operated by turning the handle. It is designed to latch the door shut however it does not lock the door as mortice locks would. They are most commonly used for doors with internal doors, in which locking is not needed. They can be fitted with lever handles or knobs.

There are various sizes of tubular latch available. The sizes vary from low-cost to the luxurious architectural. The size you select will depend on the purpose of the door and if you require the function of a lock. If you require the thumbturn release mechanism in an emergency situation, then you need a lockable latch.

The backset of your door will also determine the latch you select. This is the distance between the edge of your door and the center of the hole for the door handle knob or rose, and you will need to choose a latch that has a matching backset measurement. This will ensure that the door handle and knobs are able to operate the latch smoothly.

If you are installing a lever or knob with a spring, or without a spring, it is essential to choose a heavy-duty tubular latch. It should come with an elongated follower that is double-sprung. This will ensure a smooth latch operation and stop it from becoming slow or unresponsive after regular use.

Once you've selected the right latch to meet your needs The next step is to fit it to the door. The first step is to make sure that the latch is aligned to the top of the door frame/casing. Then mark the location of the plate and drill holes. Using a countersink drill bit will help to create the right recess to fit comfortably into.

Once the latch is set Once it is in place, you can screw it to the door. Before installing your locks or handles, it is important to make sure that the latch is functioning properly. To check this simply open and close the door several times. If it's not functioning properly try lubricating your door with WD40. Then, try it again. If you're still having problems, it might be necessary to contact a professional installer or locksmith.

Keyhole Handles

Keyhole handles work with a tubular latch installed in the door. The latch is used to open and close the door. The handle is able to engage the latch when pushed down and releases it when pulled up. The handles are typically used on interior doors, such as those in dining rooms and living rooms. However they can also be fitted to front door if paired with the nightlatch.

Door knobs are a more contemporary type of handle that combines a sprung lever/handle on a round or square fixing rose with an accompanying thumb turn or escutcheon. They come in various styles and finishes to match the doors of your home. They can be used with Euro cylinder locks or multipoint locking systems to add extra security to your door. This is accomplished by locking the door at various points along the height of the door. Door handles that are compatible with the lock are required with the correct size of the lock's center to fit the barrel.

Keyhole escutcheons are an enclosure for the door's keyhole to hide it from view and create an elegant look to the handle. They are available in the screw or pop on style and are available in a variety of finishes that match the door handle. A recessed escutcheon, that is attached to the outside of the door to cover the keyhole more and provide it with a more modern appearance, can also be utilized.

Some of the handles are compatible with Euro-cylinder locks. These are used on uPVC doors and require compatible door handles with a Euro cutout for a cylinder and the appropriate screw holes in the backplate to accommodate the euro cylinder. These handles also require a Euro Cylinder escutcheon or standard escutcheon depending on the use.

It's important to know the distinctions between a sash or mortice lock and a tubular latch and also the compatibility requirements for each. You'll have to take into consideration the door thickness as well as the door hinges and frame reinforcements, as well as the backplate of the door handle size, the dimensions of the lock centre and the screw centres for the cylinder.