Tips For Replacing a Window Handle

The replacement of the handle on your window is an easy project that can be completed in the convenience of your own home. Follow these handy tips for a smooth operation and great look.

Begin by removing the screws to reveal the screws within your upvc door locks and handles window handle. Make sure you measure the spindle in order to make sure you are getting the correct size replacement.

1. Determine the Spindle Length

When replacing a double glazing window handles handle it's important to determine the dimensions of the spindle right. It can affect the tightness or elasticity of the handle, as well as whether the handle will lock correctly into the window frame. The spindle is a metallic shaft that connects the handle to the lock in the window frame. The spindle is available in the standard cross-section of 8mm for industry or older versions of 9mm. Modern industry standards are 8mm but it wasn't always that way. It is important to confirm the measurements before buying the handle you want to purchase.

The easiest way to measure the length of the spindle is to remove the existing handle, this can be done by turning it to the open position, then unscrewing the two screws (which could be hidden behind plastic caps that will require removal) that retain the handle. Once the handle has been removed, take a measurement from the base to the point at which it ends. This will give you the measurements needed to buy a new one.

There are many options available when you are looking to pick a new window handle. From sleek chrome that will fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more classic Tudor Cottages with curled mongoose tail latches. There are many options to choose from, but the most important is to select the style that is appropriate to your home.

Espag handles are commonly fitted to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza come in distinct dimensions due to their angled blade which operates an interlocking mechanism that is multi-point inside the window.

When choosing a window handle it is important to consider the hand you use to open your door. Inline espag double glazed handles can be used with right or left-handed windows. Cranked window handles can only be used on windows that open in one direction.

2. Remove the Handle

If the handle is damaged or simply worn out, a window handle that falls off can be very frustrating. But the good part is that replacing the uPVC window handle is a simple task you can complete yourself. You will require only some basic hand tools as well as some time to complete this process.

You will need to first open the window, and ensure that it is not locked. Next, you need to remove the screws which hold the handle in position. Once the screw caps have been removed then you'll be able remove the handle.

The handle is attached to a spindle in the window frame. Depending on the kind the handle is held in place by a screw or a pin. The most common handle types are inline Espagnolette handles and the cockspur handles. Both kinds of handles are found on casement windows, as well as aluminium ones. The handles can be locked with a key to block access by unauthorised persons from the outside. You can also lock the handles by turning them clockwise.

To remove the handle, you'll need a flat blade screwdriver to loosen the clip that holds the handle. Once the clip is released, the handle will be able to slide off the spindle. After the handle has been removed, you'll need to take a measurement of the length of the spindle to ensure that the new handle will fit.

Once you have the correct size, you can now screw the new handle in place. It is crucial to make sure that the handle is securely attached and that it is rotating in the proper direction (clockwise in the case of an open or counterclockwise if the handle closes). It is crucial to ensure that the handle has not been installed upside down.

Then, you must replace the screw cover caps. After you've done that, you can test the handle to ensure that it works correctly. You should also test the locking mechanism by moving the handle from the locked position and then returning it to the locked position.

3. Remove the Screws

A uPVC handle is an important part of any house and is the first item to show signs of wear or damage. This could be due to natural factors, regular use, or even damage caused by criminals looking to gain access to your home. However, a simple repair will solve the issue and stop the issue from occurring again.

uPVC handles could also be difficult to remove if the locking mechanisms are not functioning correctly. It is often possible to fix the issue by replacing the multipoint locking mechanism, rather than the entire handle. This can help you save money.

Once you've removed your old handle you'll need to remove the screws that were fixing it to the base. They are usually located on the inside of the base. It could be necessary to use a screwdriver accomplish this. Be careful not to tighten too much the handle, as this can cause it to loosen.

The next step is to find the fixing pins or screws that hold the new handle in the correct position. They will likely be located on the inside face of the base of the handle and you'll need a screwdriver or a pair of pliers to take them off the screws. After they've been removed, you'll need to replace the caps on screws in the event that you want to do so and test the new handle to confirm that it's functioning properly.

When you're ready for installing the new handle, simply line up the spindle with the cut out in the window mechanism and screw in place. If you want to replace the screw covers make sure that the handle is in a position that is open and that the screws are securely secured. Once this is complete you're done and can enjoy your newly replaced window handle. This should allow you to avoid expensive window and patio door handle replacement replacements in the future. If you'd like to get more help with this or any other aspect of your uPVC windows do not hesitate to contact us.

4. Install the New Handle

Whether you're replacing a broken handle or simply updating it the procedure is easy and can be accomplished in just a few steps. Identifying the kind of window handle, measuring its spindle length and knowing what tools you'll need to finish the job are crucial. Always prioritise the safety of your windows and tools. It's also important to take your time and follow the steps to ensure you have a functioning handle that is safe to use.

The first step is to identify the screws that hold your existing window handle in place and remove these, whilst keeping an adequate grip on the handle to prevent it from falling and result in injury. Once the screws have been removed they can be repositioned in a secure location to be replaced in the future.

Once the old handle was removed, you can now begin to fit your new one. The handle must be fitted perfectly in order to function correctly and keep the window in its closed position. The next step is to slide the metal square to the back of the handle into the hole in your window mechanism, making sure it is secure.

Now that the new handle is installed, the final thing to do is replace the screw caps and check to see if it functions. If you're not happy with the results or if your window does not shut or open properly Contact our experts for help.

Almost all UK homes are equipped with uPVC Windows. This means that a lot of them will require replacement at some point because of damage or wear. Anyone with a bit of DIY expertise can complete the task. It is crucial that the handle you select matches the dimensions and style of the window. Contact us if you are unsure about the type of handle you need. They will be able guide you through all the choices.