Patio Door Lock Repairs

Over time, patio door repair door wear and tear can cause lock malfunctions. Fortunately, there are several easy and efficient ways to restore your upvc patio door repairs patio repair near me door's security.

Whether it's realigning the lock or cleaning the mechanism that locks These simple fixes can increase the security of your home.

Clean the Lock

While patio doors are a great way to let the outside in and keep out the elements, they can also be a security risk if your lock isn't working as it should. Over time wear and tear extreme cold and hot weather dirt and debris could take their toll on the lock on your patio door and make it difficult to open. With a little care you can ensure that the lock on your patio door is always working properly.

It is essential to first clean the patio door lock and all moving parts. This will help get rid of any dirt or coatings that could be preventing your lock from working effectively. Begin by wiping down all the moving parts of your patio door's lock with a damp cloth, then make use of a scouring pad, or a rough damp cloth to scrub any difficult-to-access areas of the door and frame that are covered in dirt. It is recommended to wipe the entire lock with dry cloth to get rid of any remaining dampness and allow it to dry completely before making use of it again.

If you have an exterior door that is fitted with a pin tumbler latch mechanism, you can lubricate the lock by applying graphite powdered to the key or by using a lubricant made of Teflon, like WD-40 Multi-Use. This type of lubricant can be easy to apply and it doesn't dissolve as time passes. If you are unable to find the right lubricant for your needs, you can use a pencil with a thick tip. Insert the pencil into the lock and jiggle it around to spread the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio doors clear from dirt, dust and debris. They are particularly susceptible to snow, ice, and other debris that can cause them block or become stuck. This can make it difficult for your patio door to open and shut.

The sliding rails of the patio door track and rollers can be cleaned by removing weather stripping that is damaged or dirty and then cleaning it, before replacing it. The same is true for patio door rollers, which can be cleaned and then sprayed with a non-stick lubricant that will allow them to move freely.

Lubricate the moving parts

upvc patio door repairs French Doors, similar to sliding patios, are operated using 3 to 4, or occasionally 5 point locking mechanisms. They include the lock cylinder and handle that is operated by the key. They also require maintenance, including lubrication of the moving parts. This can be accomplished using an oil that is thin (never WD40) and should be done once per year.

If sagging hinges don't cause the problem, it could be that the door is not aligned. It could be rubbing or catching against the hole of the strike plate in the frame. The solution is to take off the strike plate, and then use an abrasive chisel to increase the size of the mortise it sits in. This lets the latch sit perfectly in the hole and prevents scratching or catching on the frame.

Measure the length of the cylinder using the help of a piece of wood or a book that fits into the gap above the adjustment screw. The outer dimension is measured from the outside of the door to the center cylinder. The inner dimension is measured from the center adjustment screw to the end of the cylinder.

Check the Lock's Width

If your patio door latch is difficult to turn even after cleaning and lubricating, it's possible that it's not in alignment with the strike plate hole. Verify that the door is properly balanced and if the hinge screws are in good condition. In a lot of cases, however, simply moving the strike plate upwards or downwards will fix the problem.

The latch may not be able to engage properly in the event that the strike of the lock is too small. In this case you'll need to expand the hole with either a hammer or chisel, and then test the latch to make sure that it contacts the strike plate without rubbing against or catching on the frame of the door jamb.

Before purchasing a new lock, first determine the mortise type of lock you have. This can be done by looking at the end faceplate and determining if it is round or square. Then, take a look at the screw holes on the current lock and note the size of each one. This will help you find a replacement that is the same size and will fit perfectly into your existing hole.

You'll want to identify the mortise lock, and then examine it for any scratches, bends or other damage that needs to be repaired. A badly damaged or bent latch is more prone to break than one that's not frequently used, so be sure to replace the lock with a new secure and safe version in the event you notice any signs of damage or wear.

Once you've identified the type of lock replacement you require Now it's time to start the actual repair. Remove the old handle and spindle from your patio door, and then insert the new one. Start by installing the interior handle. Align it with the spindle and then secure it into place using the two screws or bolts. Install the exterior handle following the interior handle. After you've completed the steps then you can test the new handles to make sure they are able to open and close with ease and that the latch catches correctly with the strike plate.

Check the Strike of the Door.

The strike plate and the door latch are two pieces that work together to lock the door. If these are misaligned and the latch doesn't latch the door shut correctly. This problem is usually very easy to fix.

First, inspect the holes in the strike plate's receiving to make sure they are free of obstructions like dirt or plastic plugs. Loosen the keeper screws holding the strike plate in position. This allows it to move vertically, but not separate it from the frame. Then, adjust the strike plate until its holes for receiving are aligned with the latch hooks on the door latch. After the strike plate has been adjusted, tighten the screws and then test the door to determine whether it shuts easily with the new adjustment.

These plates are difficult to reach for homeowners who have sliding patio doors. However they are vital to secure and unlock your door. These metal plates are usually located at the top and bottom of the door jamb which is where they are used to support the door's latch. The door latch is placed on the strike plate, creating the seal when it is closed. If the strike plate is damaged, rusted or not installed correctly, it may prevent the latch from locking the door securely.

A misalignment between the strike plate and latch is a common reason for the patio lock to not close or remain in place. The most effective way to test for this is with the "lipstick test." Rub some lipstick on the edge of the deadbolt and apply masking tape over it. When you close the door, the lipstick will leave a mark on the tape, indicating you exactly where the latch meets the strike plate. If the mark is too high or low it is possible to adjust the strike plate.

The sliding patio door glass repair near me door locks protect your home from burglars. If they're not functioning properly, you need to fix the problem quickly. Follow these simple steps to repair your patio door lock and restore it's function.