Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this case, you will need to find some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the door and the window is significant, you may prefer security screens that has a window. This will provide the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it can be due to the handle mechanism wears out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue is, old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and that the sill pan is properly angled to drain away from the repairing window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in an ease. They can be replaced by any competent DIYer and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side hung upvc window repair; Suggested Studying, windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy process but it can be simpler when you have a person to help you hold the frame in place.

Check that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to do this once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become disaligned as a result of wear, which can cause a gap between the frame and sash. If they are beyond repair double glazing window, it could be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it may be possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The next most common cause of draughts is the window seals. They can become worn down or damaged over time and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repair windows your windows made of upvc will continue to provide an excellent level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them instead of fixing them. If you encounter any issues with your Upvc window you should consult an expert as soon as you can.