Pellet Stove Furnace

Pellet stoves can be used as a secondary heat source or, with proper venting, a primary heating option. They are available as freestanding units or fireplace inserts that give your home the appearance of a traditional wood-burning fireplace.

The auger moves pellets from the hopper to the combustion chamber, where they are burnt and generate heat. Sensors detect the flame and adjust the rate of operation to maintain a desired temperature of the room.

1. Energy Efficiency

pellet stoves modern stoves burn a sustainable non-toxic fuel composed of compressed sawdust and wood chips. They also contain bark and other materials that are normally dumped in landfills, but can be repurposed into an efficient and clean source of heating. They aid homeowners in reducing their energy use and consequently greenhouse gas emissions. Many users of pellet stoves say that they have recouped their initial investment in only a few short years through a reduction in their heating bills.

Pellets are more dense and compressed than natural wood, making them more efficient for burning. They also produce less creosote compared to traditional wood-burning fires. Furthermore, they are stored in plastic bags that keep out moisture and require less frequent cleaning.

Like other heating systems, pellet stoves must be properly measured and vented. A trained technician can assess your venting requirements and space requirements in order to get the best results.

In the process of installation, the hearth is constructed to the right size, and the vent is installed through a hole that has been cut in the siding of your home. The vent can be run through a sidewall or roof depending on your preference and the local laws.

Once the hearth and vent are done the pellet stove can be connected. Certain manufacturers provide a remote control that makes starting and maintaining the fire easy while others come with additional sensors that monitor airflow, combustion and flue temperatures, as well as pressure. If the system determines that it requires more or less pellets, it will signal the auger to accelerate or slow down accordingly.

Each stove comes with a storage hopper that holds between 35 and 130 pounds of pellets until they're needed. Hopper capacities affect how often the stove has refills and larger hoppers allow for longer intervals between refills. A grille draws fresh air from the room and then passes it through an exchanger that then is able to blow heated air into the living space by convection. A auger, grate or other device distributes pellets and a pan below is used to collect any unburned ones as well as combustion remnants.

pellet stove stores near me stoves are more energy-efficient than wood-burning models but not as efficient as electric heaters or natural gas furnaces. Electric components that drive motorized components of stoves require a power source. This could cause a problem in a power outage, but backup systems like batteries and generators are available.

2. Low Maintenance

Pellet stoves are extremely efficient, however they require some attention to operate properly. Cleaning your stove's exhaust vent and the stove will stop the build-up of harmful creosote which could cause an explosion, fire or damage to your stove or house.

A pellet stove burns natural wood particles or other materials (like corn kernels, nutshells or small pieces of scrap wood). An electric-powered auger is used to feed the fuel pellets from a tank into the burner, and into the combustion chamber. The rate at which the pellets are fed into the burner is controlled by the thermostat you set. The fire can be kept burning or decreased or even extinguished in accordance with the temperature you set. When the fire is gone the ash is then thrown into an empty ash tray beneath the burner, which can be easily removed and disposed.

Pellets are produced from byproducts of lumber processing that would otherwise be discarded. They are a sustainable source and produce less dust than traditional wood-burning appliances making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals emitted by pellet stoves is also much lower than those with modern wood stoves that are EPA-certified.

These appliances are not required to be vented through a chimney, as is the case with traditional wood stoves. Instead, they can be vented correctly through a wall, or another exterior structure. Pellet stoves have flue ports that open on the rear or top of the appliance. They are connected to a vent pipe that extends outside the home.

A pellet stove has one disadvantage that you must purchase or store enough fuel pellets for the entire winter season. On average, pellet stove owners consume three tons of pellets throughout the course of the winter season at a cost of $200 per ton. The expenses can add up however they are much less expensive than buying firewood and transporting it to a wood-burning stove or fireplace. You should buy enough pellets so that your stove will be able to run through the winter's coldest months. Also, you must have a space to keep the pellets (preferably cool and dry).

3. Reduced Carbon Footprint

pellet stove stores near me stoves generate heat from renewable biomass fuels, reducing reliance on finite fossils fuels. This reduces the carbon footprint and also helps diversify the energy sources used in homes.

The emissions from pellet stoves are significantly lower than those from wood stoves, and even the latest EPA-certified ones. The emissions from cheap pellet stoves stoves are also considerably less than those from gas furnaces. Pellets are made up of wood, sawdust and other wood wastes. They can also comprise different substances like soybeans, corn and nutshells, cherry pits and agricultural waste. When they are burned, they emit less particulates, which can cause respiratory issues and allergies as well as carcinogens and nitrous oxide.

The feed system is the major difference between pellet stoves and wood stove. Pellet stoves have hoppers to store the pellets. When the thermostat or sensors signal that the room needs heating, the auger turns. The pellets are put into the combustion chamber and are burned to produce heat. The combustion chamber flows through a heat exchanger, which transfers the heat to the blower and out into the room. This results in extremely low emissions and no creosote buildup.

When the hopper is empty, a cyclone takes away the ash and puts it in an ash pot. The stove also features a fan to circulate the clean, heated air throughout the living area. The majority of pellet stoves require little maintenance and come with a huge viewing area for you and your loved ones to relax and enjoy the flames.

The most significant aspect that affects emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality produce more emissions. When choosing your pellets ensure that they're certified to meet certain standards and don't contain other ingredients like petroleum or urea. Find a business that has a guarantee and will repair or replace parts in the event of an issue. Some states offer homeowners a tax credit in the event that they decide to go greener. This is a great opportunity to offset the initial costs of this kind of stove and makes installation more affordable.

4. Reduced Noise

Pellet stoves generate very little smoke and emissions when compared to wood burning fireplaces. A fan is used to spread heat more evenly throughout the room. This is the reason why pellet stoves require less maintenance than wood stoves. While wood stoves must be frequently cleaned of dust and chemicals pellet stoves require the use of a special metal vacuum cleaner for regular cleaning.

Many manufacturers have made an effort to design their stoves to be easy to install and to operate as well as maintain. They also design their appliances with a variety of styles that will match your home's decor. Certain models come with a WIFI app, remote control, and programmable thermostat.

The majority of pellet stoves have an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then fed into the combustion chamber via an auger. The speed at which pellets are delivered to the burner determines how hot the flame is and the heat output. The hopper can be filled with either hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Many stoves can burn biomass pellets made from corn and switchgrass. This is a green option.

Pellet stoves produce less smoke and require less maintenance due to the fact that they use cleaner fuel than wood-burning fireplaces. They don't require a chimney and are therefore an ideal choice for retrofits and new construction.

Pellet stoves don't require regular cleaning of creosote and other chemicals like wood stoves. They only need periodic inspections to ensure proper operation and maintenance. Based on the model, this could include a periodic inspection and cleaning of the accumulated Ash or "clinker," as well as the motor and fans. Your appliance dealer can provide the proper procedures for your brand and model. He can also help you identify the right fuel for your stove, and give details on storage and safety.