How to Unstick a Suzuki Ignis Key

suzuki vitara key replacement's quirky, affordable city car gets a re-designed update. It's not a hot-hatch, but it eats up roads in rural and urban areas with aplomb, and its unique turning circle makes driving in town an easy task.

The new model comes equipped with smart driver assistance and safety technologies such as lane departure warning and a sleepiness detection alarms, which are great enhancements for long drives.

Steering Lock

The steering lock is a vital security feature that will stop your Ignis from being stolen while it's in drive. It's an important security measure however it can be a pain when you need to go someplace and you're not able to unlock the wheel. There are a few easy actions you can take to fix the problem.

The first step is to determine if the ignition switch is in the "on" position. If this is the case, then try turning the key in the same direction you did prior to the time that the wheel was locked. It can be a bit difficult, but in most cases it's enough to unlock the wheels.

If the wheel isn't able to unlock after spraying canned air into the ignition cylinder, it is possible to grease the cylinder. Be sure to put on eye protection before doing this so you don't get any canned air in your eyes! Liquid graphite could also help to help lubricate the cylinder.

If none of these strategies work, you'll need to replace the ignition lock assembly. Fortunately, this is an easy part to find at any auto parts store. Be sure to buy the exact replacement, and compare it to the original. Also, make sure to remove the cover that covers the ignition to see and access the assembly.

Worn

The steering lock may bind the ignition switch, causing the key to become stuck. This is a safety feature designed to prevent your Ignis from rolling away while the engine is running. If this happens, you can unbind the steering wheel by manipulating it.

Over time, your ignition key can start to wear out and become more difficult to turn. This might not be as common as a damaged ignition switch, but it is a possibility that it will occur. If this is the case, then you need to replace your key.

Check to see if anything is blocking your Ignis ignition key from entering the cylinder. There may be dirt or debris which can become stuck inside the ignition cylinder, preventing it from turning.

You can also try using a small amount of lubricant to see whether it helps. There are a range of lubricants at your garage or at a local auto parts store.

Another option is to utilize an silicon "glow in the dark" key cover. These covers absorb light and release it in murky or dark conditions. They also protect your key from wear and tear. They are available for all Suzuki models, and are available online or from a nearby suzuki alto remote key dealership.

Bent

A key can bend over time. This could cause the teeth on the key not to be in contact with the lock cylinder in the same way and prevent the key from turning the ignition. If this happens the key needs to be replaced. If you have a spare, it is an ideal idea to get it duplicated and store it in a secure place.

The cylinder of ignition can wear out. If the lock pins in the cylinder get stuck or snagged together the cylinder may be unable to allow the key from going through or out of the cylinder. Removing the cylinder is a solution to this issue, but it's best to do it before the key gets stuck in the ignition to prevent further damage.

If your key from Ignis is stuck even after trying the easier things to fix it's time to lubricate the cylinder. Graphite powder or liquid graphite may assist in allowing the lock pins to move more freely and release your key. This is readily available at the majority of auto parts stores. When applying the lubricant, ensure that your ignition is in park and do not attempt to pull it out of its bind it. This could cause more serious issues.

Broken

If you have tried a variety of things to make a key remove its stick but it's still unable to move, the last resort is to apply oil to move it. You can buy some of this at your local auto parts store and apply it to the inside of the ignition lock cylinder using a cotton ball, or rag. Move the key back and forth gently to spread the lubricant around and then try again. You can try pushing it forward but be careful not to push too hard or you could damage the cylinder.

It's also possible that the internal circuitry of the key will begin to fail as time passes. This isn't the case as often however, and you'll need make a duplicate of the key.

Finally, the case of the case of your suzuki key fob replacement key fob could become damaged or worn. This is particularly true in the case of an inexpensive replica key fob that has a plastic or rubber shell. Based on the circumstances, The Key Crew can sometimes move the internal circuitry from the old key fob to an alternative shell case, avoiding the need to purchase a completely new key fob. When we call to schedule your service, we'll tell you know if this is an viable option.