Door Lock replacement door lock - What You Need to Know

When the locks on your door begin to show signs of wear and tear, it's generally a good idea to replace them. This could be due to issues with turning the lock or having a key that doesn't fit.

Fortunately, putting in new hardware for your door locks is actually quite simple. All you have to do is follow these steps.

Deadbolt

The deadbolt on your door is the primary defense against forced entry. It is more durable and secure than the latch which activates the lock. So, you will want to ensure that the new deadbolt you purchase meets your needs. If you can, choose a deadbolt that's made with case hardened steel and no exposed screw heads on the outside to prevent unauthorized drilling. The interior side of the deadbolt needs to be secured to your door frame to enhance security.

During the process of installation make sure that your new deadbolt's bolt slides smoothly into the strike plate when you close and lock the door. If it does not use a wood chisel to make a mortise for the bolt hole in the strike plate and re-install the deadbolt. Make sure the latch on the doorknob is in contact with the hole for the deadbolt when you shut and lock the door, too.

Before installing your new deadbolt, check that it matches the size of the previous one. The majority of door locks include an example of how far the bolt should be placed above the doorknob. However, it is always recommended to consult an expert in the field if you are unsure what backset measurement you need for your patio doors locks replacement. They will be able point you to models that will work with your door and deadbolt opening.

After ensuring your new bolt assembly is the correct length, insert it into the hole of the door. Screw the latch faceplate in the hole if the new deadbolt is equipped with one. It's an excellent idea for you to screw the latch faceplate using the screws recommended to the frame.

Some sets of locks come with an attractive or "dummy" bolt that lets you install the keyed-deadbolt while still having an operational latch. If you have the option, the dummy bolt must be installed using the same screws used to mount the faceplate of the latch. This will ensure maximum security.

Some deadbolts can only be opened through a thumb-turn and others have two cylinders that allow both keyed and unkeyed access. Regardless of what type you select it's a good idea to buy a commercial-grade lock for the best security. These are typically tested to last for 250,000 cycles of opening and closing before being sold to homeowners.

Latch

The latch is the component of the lock that retracts the bolt to open and close the door. It is usually secured with screws on the sides, but can also be attached to the strike plate of the door jamb. It's important that you replace lock on patio door a door latch with the correct one that matches your existing hardware. You can check by putting the latch up to the hardware you have already, or you can look on the label of the replacement. Dunn Lumber carries a variety of brands, however it is generally recommended to stick with the same brand of your existing hardware to ensure you receive a latch that will fit perfectly.

Some doors feature a hasp instead of a latch. A hasp is a piece of strap that has a slot inside it that allows it to be placed over the staple. The staple is then nailed to the frame of the door or door using a nail. When the door is closed and the strap is pulled, it pulls the staple down and locks it into the frame. Hasps are typically used in commercial structures because it's less expensive than deadbolts.

Locks can wear out over time like any other mechanism that has moving parts. Sometimes, the internal mechanism may start to "stick" and become difficult to turn, requiring to replace the entire lockset. Sometimes, the doorknob on the outside will be damaged and it is important to replace that as well.

If your lock is sticking, you can try using some graphite inside the keyhole. You can either spray it on the key or dust it onto the interior side of the lock, then operate the lock a few times to get the graphite into the mechanism. You can also use a screwdriver to remove the knob that will expose the internal components and let you observe what's going on inside the.

Once you've removed the knobs, find the two or three cylinder setscrews on the outside of the cylinder. Then tighten them by turning them clockwise. The faceplate should be removed and replaced. Surface-mounted rimlocks have an additional set of cylinder setscrews on the back case that must be removed, as well as the faceplate.

Strike Plate

The strike plate is a reinforcement and upgrade to a locking system. It is affixed above the holes for the deadbolts and master key systems bolts. It keeps intruders out by making sure that the lock's latch is caught in the strike plate when the latch or bolt is engaged. Apart from enhancing security, a good strike plate can also enhance the durability of the lock.

Standard strike plates are flat metal plates with a hole, or several holes cut into them. It is affixed to the door frame, usually with screws, to give the latch something to sink into as it closes. The strike plate has to be aligned precisely with the lockset in order to give the greatest protection against burglaries.

If the strike plate of the door is damaged, you must replace it as soon as you can. This will ensure that the door will close and latch properly. The first step when replacing upvc door locks the strike plate is to ensure that it is properly aligned with the bolt hole inside the doorjamb. A simple way to do this is to put tape over the bolt hole, and then test the latch by closing and opening the door. If the latch doesn't work, remove the tape. Then chisel it to create a flush with the doorjamb.

After the area has been chiseled it is vital to use a stronger bolt to anchor the strike plate. These should be at least three inches long to ensure they are securely fixed to a stud behind the trim board. If you don't install the longer screws or the wood inside the doorjamb could break during a robbery attack by a burglar, and leave the door vulnerable.

A professional locksmith is able to quickly replace a strike plate that's become worn or damaged. They can also install an entirely new strike plate on a door that has never had one before. Additionally, they can upgrade existing strike plates to enhance the security of a building and enhance its aesthetics. This can help a property owner attract tenants who are looking for a safe and secure living environment and greater peace of mind.

Keys

The key cylinder is the component of your lock that accepts a particular key that allows pins to be moved into place so the inner handle can be turned. The key cylinder is the primary component of your door lock, because it fulfills the function that locks were made for to safeguard you, your family, and your possessions. This is the reason that many people choose to get their locks rekeyed rather than replaced.

The replacement upvc door lock mechanism of locks is more difficult than simply replacing lock in upvc door (you can try this out) the existing handle-lock combo or deadbolt. The old hardware, cylinder, and handle (if you have a knob and lock combo) must be removed from the door before the new lock can be installed. While there are a number of DIY-friendly tools that can be used to change a lock yourself however, it is recommended you speak with a professional locksmith to make sure the job is done properly.

It is important that you have the correct key before you can install your new lock and cylinder. A duplicate key will not work properly and could cause the lock to fail, making it impossible for you to open. A professional with experience can assist you in avoiding this by making sure that you have a genuine, functional key for your home.

The next step is to take off the faceplate, and then the latch plate. You'll need a screwdriver to remove the screws which hold them in place. If the new plates will be identical to the original ones, you might want to secure them to save time. If you have to replace them, be careful not to overtighten screws, as this can cause them to lose their grip.

After you have removed the plates, you will need to determine the measurements for your new locks. While most modern locksets can be able to fit a standard width of door, it's best to know the dimensions of your door prior to installation to avoid frustration when you arrive at the hardware store. It is also important to be aware that doorknob locksets tend to be different sizes than deadbolt locksets, and commercial models can have an enlarged bolt or latch.