Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case, you will need to find some plastic spacers that will help the new pane to fit perfectly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional comes out to fix the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

upvc window repair near me is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it can be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and wet floors. The leaks of water from windows do are not just a cause for degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. Most often, upvc window repair near me window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is important to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris in them and that the sill pan is properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal than the frame. A upvc window repairs specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with ease It could be the hinges that are at fault. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to change a window hinge but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are happy to provide advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window repairs near me.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become misaligned. It is located on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than repair them. If you have any problems with your window made of upvc it is recommended to speak with an expert as soon as you can.