Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If windows with double glazed window repairs near me panes are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled.

Once the glass is removed from the window repairs, it's best to cover the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, with time, they are susceptible to a range of problems including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could be due to the handle mechanism getting worn out. It's relatively simple to fix a loose upvc window repair near me handle. First, you'll need to close the window and perform a test fit. The corner joints of the sash must be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to act if you awake each day to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes do not have debris in them, and also that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window repairs.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed window repairs near me glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease, it may be hinges at fault. They can be replaced by any competent DIYer and can be done within a few minutes.

Like all mechanical parts hinges will wear out over time. It is an easy process but it can be easier to do when you have a person to help hold the frame in place.

Verify that the uPVC hinges open and close in the correct direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us a photo via our website will often resolve the problem. We are more than happy to offer assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges can also be disaligned as a result of wear, causing a gap where the sash meets frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge's side, and might require to be cleaned. In some instances it might be necessary to replace them.

These seals can wear down or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair your windows made of upvc will provide a great level of insulation and security for your home. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.