How to Unstick a Suzuki Ignis Key

suzuki ignis key fob programming's funky and affordable city car receives a midlife refresh. It's not a hot-hatch, but it eats up roads in rural and urban areas with ease, and its nifty turning circle makes town centre driving effortless.

The new model is packed with clever driver assistance and safety features such as lane departure warning and a sleepiness detection alarm, which are both welcome additions to long drives.

Steering Lock

The steering lock is a crucial security feature that will stop your Ignis being stolen while it's in drive. It's a crucial safety feature however it can be a hassle when you have to get somewhere, but you're unable to unlock the wheel. There are a few basic things you can do to fix the issue.

Check first that the ignition switch is set to "on". If this is the case, then try turning the key in the same direction you did prior to the time that the wheel became locked. It can be difficult, but it's typically enough to unlock the wheel.

If the wheel doesn't unlock If it doesn't, you can spray a little of canned air into the ignition cylinder to help lubricate it. Wear eye protection to prevent getting cannisters of air in your face. You can also make use of liquid graphite to lubricate your piston.

If none of these works, you will need to replace the ignition assembly. Luckily, this is an easy part to locate at any auto parts store. Make sure you purchase an exact replacement and compare it with the old one. Also, be sure to remove the cover over the ignition so that you can see and access the assembly.

Worn

The steering lock can cause the ignition switch to be stuck. This is a security feature that is designed to stop your Ignis from rolling away while the engine is running. If this occurs, you can unbind the steering wheel by manipulating it.

Over time, the Ignis keys can wear out and become more difficult to turn. It might not occur as often as a damaged switch, but it does happen. If this is the case you must change your ignition key.

You should also check to determine if there's obstructions to your Ignis key from getting into the ignition cylinder. There may be debris or dirt that could get stuck in the ignition cylinder and block it from turning.

You could also try some lubricant and see whether it will help. You can find a wide range of lubricants in your garage or local auto parts store.

Another option is to use a silicon "glow in the dark" key cover. These covers absorb light and release it in dark or hazy conditions. They also protect your key from wear and tear. They are available for most suzuki car keys replacement models, and are available through the internet or from a nearby suzuki car keys dealership.

Bent

With time and frequent use, a key could become bent. This could cause the teeth of the key not to be in contact with the lock cylinder in the same manner and prevent the key from turning in the ignition. If this happens the key needs to be replaced. If you have a spare key, it is best to have it duplicated and put it in a safe place.

Another possible cause is the ignition cylinder itself can wear out. The internal lock pins may get stuck or stuck together, preventing the key from moving completely into or out of the cylinder. Replacing the cylinder can solve this issue, but it's recommended to do this before your key is stuck in the ignition to avoid further damage.

If your Ignis key stuck despite trying the easier things to fix it could be time to consider lubricating the cylinder. Graphite powder or liquid graphite could aid in allowing the lock pins to move more freely and release your key. This is readily available in most auto parts stores. When applying the lubricant, ensure that your ignition is in park. Don't attempt to manipulate it to loosen it. This could lead you to more serious problems.

Broken

If you've tried a variety of methods to make a key remove its stick but it's still unable to move, the final option is to use a lubricant to get it moving. You can buy this lubricant at a local auto parts store and apply it using either a cotton swab, or cloth to the inside of the lock cylinder. Try again. Move the key backwards and forwards gently to spread the grease. If you are able to massage it forward, do it, but be careful not to push too hard or you may break it off in the cylinder.

The circuitry inside the key may also become unresponsive due to age and usage. This isn't the case as often, and you'll need to have a duplicate key made.

In the end, the case of your suzuki car key replacements key fob could become worn or damaged. This is especially true if you are using an inexpensive replica key fob that is made of plastic or rubber shell. The Key Crew may be in a position to transfer the internal circuitry of your old keyfob into a replacement case depending on the circumstances. This will help you save the cost of buying an entirely new keyfob. When we call to schedule your service, we'll let you know if this is viable alternative.