wood burning fires, just click bioimagingcore.be, Need to Be Hot and Clean

Wood burning fires are not only comforting and mesmerising they're also a vital part of our health and well-being. They need to be warm and clean in order to be effective.

Green, or unseasoned wood has high moisture content that makes it challenging to burn and light efficiently. The seasoned, or kiln dried wood has a low moisture content and is easier to light and keep burning.

Efficient Combustion

The wood fire must be sufficiently hot to burn off water and reach temperatures that exceed 540 deg F. 900 degrees F in ideal conditions) in ideal conditions) where the secondary combustion process begins. This is the primary process for efficiently burning the fuel and minimizing pollutants, smoke, and creosote buildup in the flue.

It is crucial to understand that the temperature needed for secondary combustion depends on the type of fuel and the conditions around it. The best way to limit the variation is to use well-seasoned firewood that has an average moisture content of less than 20 percent.

In addition, the amount of air that is pumped into the fire can greatly affect the amount of heat produced and burn time. The more oxygen that is available, the faster the fire will burn. If the supply of air is insufficient a shed wood burner fire produces less heat and burn slower.

To ensure maximum burn time and efficiency To maximize the efficiency and time of burn, a wood stove or fireplace insert should be equipped with an adjustable air damper. The wide-open setting gives the fire to get all the oxygen it can get and will quickly exhaust the fuel supply. A fire that is contained within an area of limited size is less likely to spread.

A load of firewood that is well-dried is also crucial for efficient wood burning. When wood is cut just recently and hasn't had the chance to dry out, it will have high levels of water, which could make it difficult to burn. It is recommended to use only wood that is seasoned and has been stored outdoors for a period of six to nine months for the best performance.

Another consideration is the BTU content of various types of wood. For example, white pine or spruce trees might be cheaper than eastern hardwoods, such as black locust or shagbark, however the BTU values of the latter are much higher, meaning they will provide more heat for the same amount of wood burned. This is the reason it's important to take into consideration your heating requirements and fuel costs when selecting your firewood.

Clean Burning

Wood smoke can trigger indoor air pollution, which can irritate lungs and cause respiratory distress in seniors and children. These pollutants include volatile aromatic hydrocarbons (PAHs) like benzo-a pyrene and formaldehyde as well as volatile organic compounds like benzene. When wood is burned and smolders, volatile tars like creosote also get released.

Smoke from poorly-designed wood stoves and fire places can contribute to poor air quality in the outside by reducing visibility and contributing photochemical smog. If properly used, however, modern technology for combustion in wood stoves that burn clean and in fire places can help reduce the emissions.

Stage 1 - Vaporization Moisture: As the log warms, it releases water vapour which escapes through the chimney flue. This requires more energy than if the log was dried before burning. This also wastes energy that could be used for to heat your home.

These vapors combine in the flue with carbon particles, resulting in smoke. Smoke is one of the major contributors to particulate matter in the air and is among the major sources of smog that we experience on clear days.

If properly used Wood stoves and fireplaces that utilize clean burn technology can reduce the problem by burning the logs into a charcoal-like state that releases less volatile gasses and produces most of the energy from the logs as usable heat.

Avoid using damp, sour or decayed wood to ignite your fire. It is more difficult to burn and produces more creosote. Also, don't overburden your stove with thin and soft wood such as fir or pine as it requires more energy to burn them, and they also produce more smoke, which can lead to chimney fires.

Always wait until the ashes have cool before handling them. Make sure you store or dispose of them in a safe manner since ashes could ignite when exposed to water, and they are hazardous in landfills. Use them in your garden or at home.

Storing, seasoning and properly burning your wood can help you save money and ensure your stove runs efficiently. It is also essential to clean your chimney regularly to remove deposited creosote and particles, as well as prevent chimney fires and ensure safe operation.

Safety

It's hard to beat a warm fire in the winter cold, but safety precautions must be taken. If fires are not constructed correctly and left unattended or burnt, dangerous fumes can enter the home. Creosote can also build up in the chimney. These deposits can block the flue, block airflow, and cause your wood stove or furnace to work less efficiently.

Never burn treated or painted wood, household garbage paper, rags, and other combustible materials in your wood heater stove-burning stove or fireplace. They emit noxious gasses and release toxic fumes like carbon monoxide. Don't use explosive liquids to ignite fires. Kerosene, gasoline and lighter fluids can increase emissions, create toxic creosote, and even cause chimney fires.

Keep flammable materials, such as curtains, furniture and toys away from your fireplace or stove. Never hang clothing on or near your fireplace that is wood burning. Make sure that children understand that the fire is hot and should not be touched.

Use only seasoned wood for your fireplace or stove. Seasoned wood is dried throughout the summer to decrease the moisture content. Wet woods emit more smoke and creosote whereas mature logs are more efficient and clear. The shed wood burner that is seasoned appears darker and has cracks in the end grain and sounds hollow when it is tapped. Keep your logs outside, neatly stacking them with the top covered but permitting air circulation around them.

Be aware not to over-load your fireplace or stove because overloaded appliances produce more smoke and less heat. In addition, overloaded fires can produce dangerous levels of carbon monoxide. If you have an older appliance that has an iron liner, you should inspect it frequently for indications of wear. This can lead to a chimney fire.

The EPA recommends reducing smoke in your home by using dry, split and well-seasoned wood, and then constructing a warm fire using small pieces. Avoid soft woods such as pine. Pine is a good starter material for an open flame, but should not be used more than. These woods with resin and sap, which, when burnt, deposits excessive creosote inside the chimney.

Maintenance

A warm flame in a wood burning stoves for sale burning fireplace is a great way to enjoy the cold nights of winter. But, it is essential to maintain your fireplace to ensure that you reap the maximum benefits from your fire. Regularly cleaning and inspecting your fireplace is the best way to prevent problems that could develop. This prevents creosote buildup and keeps the chimney clean to ensure maximum efficiency.

If the wood doesn't fully burn it forms creosote in the chimney. If a substantial amount of creosote accumulates, it can cause chimney fires, which are the second most common cause of house fires in the United States. The failure of a fireplace to burn completely can be caused by a variety of causes, including improperly closed dampers, cracks in the chimney's liner, and a lack or regular cleaning and removal of ash.

Creosote can build up excessively when wood is not properly seasoned. This is due to the fact that up to half of the weight of a piece wood is water. The water boils during fire and releases heat. It also consumes energy. The water vapor that is produced then condenses into creosote or is released into the air as part of smoke.

Another harmful byproduct of burning wood is soot. Soot is more pliable than creosote, but it can stick to the walls of your fireplace and block air flow. It can also be an ignition risk since it can ignite easily when exposed to gasses that are combustible.

You should remove the ashes and put them in an ash bucket made of metal, which you should keep outside on a non-flammable surface. The ashes can also be used as an energy source for plants Don't forget to spread them out across the backyard!

It is recommended that a Certified Regency Dealer inspect your fireplace and chimney regularly. The technician can check for cracks in the chimney, soot and creosote levels, a properly closed damper and the condition of your catalyst. If you have a two-stage fireplace that has an air tube, the catalyst must be removed and checked visually for blockages. Refer to the user manual to learn the procedure for your particular unit.