UPVC Replacement Door Handles

As time passes, the handles on your doors will get worn out and will require replacement. It is essential to match the dimensions of the handles that were previously used when replacing them.

The top screw's position, the lever and the keyhole sizes are the three measurements you need to verify. Refer to the size guide for assistance in this.

Inline Lever/Lever

A lever/lever door handle is a contemporary handle that can be used on new or replacement doors. This type door handle is available in a variety of designs and finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are constructed of durable materials and are ideal for doors with multi-point locks that require a strong design. The handles are inline and use the same screws and spindle to fix them. They can be easily mounted on any uPVC/Composite door.

The sprung lever design allows the handle to be placed and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles. This helps to ensure the quality of the finish and the performance of the handle over time. The sprung lever can be cut to fit a wider range of locks. This is useful for doors with narrower openings where the cylinder is further back in the door. A shortened lever can also be used for doors with a latch that can be activated with the thumb inside.

Lever Pad

The lever pad upvc handle differs from the lever handles that are commonly found on doors. These handle types are either operated by one spindle, or two spindles, either inline or offset. They are typically employed on upvc sliding door handle double glazed doors and come in many variations & styles.

The handles have been tested to at least 200k cycles and are available in various finishes like White Silver, Chrome, & Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All UPVC handle lever pads include a spindle and screws, and can be fitted on a uPVC door. The 211mm backplate fixing centres allow for a wider size handle that can be beneficial when replacing a damaged or worn multi-point door lock mechanism. These levers for handles are also spring-loaded, which solves the issue of handles that slide out of the horizontal position when they are not in use.

When selecting the replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ of the multipoint lock as well as the uPVC door. This measurement is often referred to as the 'handle centre' or 'cylinder centres' and is a critical aspect to match the correct handles.

When you have the right PZ size you will then be required to make sure that the lever pads and push pads are in a suitable shape for the American with Disabilities Act (ADA) compliant handles that you require for your doors. They are typically round or square with an internal lever and an external push pad.

The majority of the UPVC Lever Pads we offer are sprung. This means they return to a horizontal state when not being used instead of hanging and possibly sticking in the frame. This stops draughts and cold air from getting into a house. The majority of UPVC lever pad handles are available in left and right handed models which allows them to be placed on either side of the doors.

Euro Cylinder

Cylinder locks are typically found on uPVC doors, but can be utilized on other types of doors. They work by using a key to unlock a cylinder that is then revealed with pins that can be aligned with the pins in the lock body and permitting them to turn a revolving cam, thus opening the door. Euro cylinders can be fitted with up to six pins. External and internal bi-fold doors handle require different levels of security.

The selection of a cylinder is essential. It is based on the use that your doors and handles receive. For instance, exterior doors must be secured with a higher security cylinder, whilst internal doors can be secured using the standard cylinder. Certain cylinders are equipped with additional features that can improve security, such as anti drill or anti bump properties.

To make sure that the euro cylinder is the right size for your door, it should be measured correctly. The cylinder must be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn, if there is one. It is best to do this with the lock in place however, in the event that this is not feasible, you can take it off and remove it to take measurements. A cylinder that is protruding beyond the handle and escutcheon could be susceptible to attacks like snapping locks, so it is important to make sure it's not too long.

Most newer cylinders have been constructed with anti-drill and bump resistance features included in their design. These features are designed to minimize the chance of a attack by forcing the cylinder to rotate in the opposite direction. This can help stop the attack and ensure your doors are secure.

There are also cylinders that are constructed to withstand snapping. This is a common attack on cylinders. A specific tool is used to break the break line of the lock and then the front of cylinder is snapped off. This is a much faster and more convenient method of gaining access than through a multipoint locking window handle system. It also leaves less evidence of the burglary which could delay insurance claims.

Spring Cassette

This spring cassette is found in the base plate of the door handle. It provides a sprung solution to bring your multipoint lock handles to their normal position after using. There was a time when handles of this kind did not have a spring built into them, and as a result, they tend to droop or drop once the locking mechanism is removed. The addition of this simple element is among the best ways to correct this and it is also an excellent way to stop your doors made of upvc from becoming stuck in either closed or open position, since they aren't always easy to close manually.

These spring cassettes have been specifically designed to be used with multipoint locks that are sprung They will not work with multipoint handles that are not sprung and you will need to have a custom hole cut into the backplate to allow them to fit (please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the backplates of door handles of many kinds of uPVC doors. They are fitted with a square cut out which accommodates an 8mm spindle and they are supplied individually.

These spring cassettes are a great value solution to the problem of sagging door handles. These spring cassettes are simple to install and can extend the life of your uPVC door. For more information on our selection of uPVC spares and accessories contact us today. in touch with our team. We are available to assist you and provide professional advice.